DM500-S in Stock ,Please Contact me As soon as possible!

250 MHz PowerPC Processor (350 MIPS)
Linux Operating System, Open Source.
DreamCrypt embedded
1 x Smartcard-Reader
MPEG2 Hardware decoding
COM port V.24/RS232
100Mbit full duplex Ethernet Interface
2 Status - LED
32 MByte RAM
Unlimited channel list for TV/Radio
Channel change in less than 1 second
Fully automated channel scan
Supports unlimited Bouquet Lists
EPG-Support (Electronic Program Guide)
Supports multiple LNB switches (DiSEqC)
Adoptable OSD (Skin-support)
SPDI/F optical TOTX178 AC-3 output
1 x SCART output
A/V output (Audio / Video Cinch)
External 12V power supply
Dimensions: 196 x 130 x 40

Technical Specification:
DBS-Tuner:
Frequency Range 950 …. 2150 MHz
Signal Level - 65 dBm …. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 …. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming
Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming
LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption:
< 10W / 12V
Input voltage:
DC12V,alternating acurrent +/- 15%
Extern power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A
Others:
Ambient Temperature +15°C...+35°C
Humidity < 80%

DM600 PVR

          250Mhz IBM PowerPC Prozessor (350 Mips)     

• Linux open source (most parts under the terms of GPL)
• Integrated Compact Flash Interface Slot
• 1 x DVB Common-Interface Slot
• 2 x Smartcard-Reader
• MPEG2 Hardware decoding (fully DVB compliant)
• Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)
• Big-size LC-Display
• USB Port
• 10/100 MBit compatible Ethernet Interface
• Modem
• 12V switch cinch
• V.24/RS232 Interface
• Common NIM DVB-S
• 32 MByte Flash
• Channel-change time < 1 second
• 96 MByte RAM
• Unlimited channel lists for TV/Radio
• Integrated IDE UDMA66 Interface
• Supports directly bouquet-lists
• Support for internal HDD in any capacity
• Full automatic service scan
• Supports EPG (electronic program guide)'
• Supports multiple LNB-Switching control (supports DiSEqC)
• RF modulator
• S/PDIF Interface for digital bit stream out (AC-3)
• Supports own videotext
• Audio/Video cinch out
• Fully adaptable OSD in many languages and skin-support
• 2 x Scart-interfaces
• MINI-DIN connector for extern IR (send)

• DBS-Tuner:
  Frequency Range 950 . 2150 MHz
  Signal Level - 65 dBm . - 25 dBm
  Signal-to-Noise Level 12 dB max.
  DBS-Tuner Input Connector F-Type female
  Input Impedance 75 Ohm
  AFC +/- 3 MHz
  Demodulation Shaped QPSK
  FEC Viterbi and Reed-Solomon
  Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
  Roll-off Factor 35 %
  Demultiplexing according ISO 13818-1

  Common-Interface:
  Common-Interface Power Consumption max. 0,3A/5V
  
  Output analog:
  Output Level L/R 0,5 Vss on 600 Ohm
  THD > 60 dB (1 kHz)
  Crosstalk < -65 dB

  Video decoder:
  Video Compression MPEG-2 and MPEG-1 compatible
  Video Standard PAL G/ 25 Hz
  Video Formats 4:3 / 16:9
  Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
  Letterbox precolating for 4:3 TV-Device

  Audio decoder:
  Audiokompression MPEG-1 &mp; MPEG-2 Layer I and II
  Audio Mode Dual (main/sub), Stereo
  Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

  Output digital:
  Output Level 0,5 Vss on 75 Ohm
  Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
  S/PDIF-Output optical (AC3)

  Video parameter:
  Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
  Teletext filter in conformity with ETS 300 472 Standard>

  TV-Scart:
  Output: FBAS,RGB,S-Video over OSD selectable

  VCR-Scart:
  FBAS

  Mini DIN:
  I2C for stearing of external devices
  IR funktion

  Ethernet:
  10/100 MBit compatible interface
  Function Update of Firmware, Connect to PC

  USB:
  USB 1.2 connector

  Serielle Interface RS 232:
  Typ RS232 bidirectional
  Bitrate 115,2 kBit/s max.
  Plug Connector SUB-D-9
  Function: Update of Firmware

  Pins:

  1. 5V
  2. SDA (I2C-Kanal 2)
  3. SCL
  4. 3,3V
  5. GND
  6. IR-Output
  7. GND

  LNB power and polarisation :
  LNB Current 500mA max. ; short-circuit-proof
  LNB Voltage vertical < 14V without load, > 11,5V at 400mA
  LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
  LNB shut-off at Standby-Mode

  UDMA66 IDE Interface:
  Intern for connect HDD
  Compact Flash - Reader

  Count of active satellite position:
  DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
  DiSEqC - Rotor Control

  Physical specification:
  Ambient Temperature +15°C...+35°C
  Humidity < 80%
  Size (W x D x H): 374 mm x 230 mm x 75 mm
  Weight: 1,8 kg  without HDD

  Power consumption:
  < 20W (in operation, horizontal polarization / 400mA LNB current)
  < 11W (in operation, without LNB)
  < 4W (Deep-Standby-Mode)

  Input voltage:
  230V / 50 Hz alternating acurrent +/- 15%

Fortec Star  FSCO 5600 Ultra+  For Europe market

One Embedded Card Slot
Dolby Digital 5.1 audio pass-through (optical)
Timer function for Sleep / Wake Up / VCR Record and Channel Reminder
Wake-up and Sleep Timers
Fully MPEG 2 / DVB compliant, MCPC/SCPC, C/KU reception
1 LNB input with IF loop through for 2nd receiver
Variable input symbol rate 2 ~ 45Msps
Manual PID scan function
DiSEqC 1.2 and USALS supported
Picture-In-Graphics function
Electronic Program Guide
Teletext supported by OSD and VBI
Multi language menu
Favorite channel group set-up and parental lock
Data transfer: receiver-to-receiver or PC-to-receiver
13V/18V LNB switching / 22KHz on/off
4 RCA connections (1 Video, 2 Audio L/R, 0/12V)

Specification:

Conditional Access Interface
Smart Card Slot
1 Embedded Card Slots
IF / Tuner
Input Frequency
950 MHz to 2150 MHz
Input Signal Level
-25 to -65dBm
Input Impedance
75 ohm nominal
Input Connector
F-type, IEC 109-24, Female
FEC Decoder
Convolution Code Rate l/2, 2/3, 3/4,
5/6 and 7/8 with Constraint Length K=7
Demodulation
QPSK
Symbol rate
2-45 Ms/s SCPC/MCPC
IF Frequency / Bandwidth
480MHz / 30MHz Type
LNB Power & Polarization
V13 / H18, 600mA MAX. over current protection
DiSEqC Control
Ver. 1.0 / 1.2 Compatible
DiSEqC
USALS compatible
Audio / Video Decoding
Video Decoder
MPEG-2 MP@ML (ISO/IEC 13818-2)
Input Rate
60Mbit/s Max
Video Resolution
720 x 576 (PAL)
Aspect Ratio
4:3, 16:9
Audio Decoder
MPEG 1- Layer I & II
Audio Mode
Mono L/R, Joint Stereo, Stereo
Audio Sampling Frequency
32, 44.1, 48 KHz
Audio / Video Output
Outputs
TV SCART, Video, Audio L/R, 0/12V
S/PDIF
Digital Audio Output, Optical
DOLBY DIGITAL 5.1 Pass-through
Serial Data Interface
Connector Type
9 Pin D-Sub (male)
Signal
RS-232C, Max. 115200Bps
Power Supply
Supply Voltage
100VAC ~ 250VAC 50~60Hz(SMPS)
Power Consumption
Max. 30W
Dimensions
260(W) x 210(D) x 45(H)mm

Openbox X 820 WITH 2 CI AND 1 CA

2-CI Slot
• MPEG- 1&2 / DVB compliant Video and CD qualty sound
• User-friendly Multi-language OSD whith 256-color
• Easy installation for multiple satellites
• Positioning by DiSEqC 1.2 and USALS
• Powerful EPG with multiple-day information
• Zoom-In function
• Auto resolution conversion for NTSC/PAL
• Variable TV-screen format ratio conversion (16:9 / 4:3)
• Max. 6000 channels programmable (3000 channels for TV & Radio each)
• SCPC / MCPC receible from C/Ku-band satellites
• Last channel memory whenever operation off
• Multi event timer function (daily/weekly)
• Teletext (OSD/VBI Insertion) and subtitle supported
• Perental lock
• PC Editor for editing and upgrading channel lists
• 4 digit and 7 segment front panel display
• Software upgrade via RS-232C from PC (PC to STB) or (STB to STB)
• OTA Software upgrade via ASTRA satellite (Optional)
• AC Power switch (Optional)
• S/PDIF forDolby Digital Bitstream Out with Coaxial and/or Optical (Optional)
• 0/12V (Alternative of S/PDIF Coaxial or 0/12V)
• S-VHS Video output via Mini DIN (Optional)

OPENBOX X 730 USB PVR

Recording & Playback with External USB (2.0) Devices
Event Recording by EPG
Recording and Time Shifting Simulataneously
USB 2.0 Host Support (MP3 Player & JPEG Viwer)
MPEG-II Digital & Fully DVB Compliant
Blind Scan
Multi- LNB Controlled by DiSEqC Control Version 1.0, 1.2 and USALS
Multi- Satellite Search
Support EPG (Electronic Program Guide)
On- Screen Display with 65535 Color Full Resolution
Favorite Channel Groups
Powerful Channel Control by Favorites, Lock, Skip, Move and Delete
Channel Sorting by Alphabet, Transponder and CAS
Multi- language Supported (OSD & Menu)
Teletext Support
Maximum 10.000 channels Programmable
Multi- picture Display
Parental Lock
CVBS Video & Audio Output via RCA
CVBS, RGB Video & Audio Output via TV SCART
Optical & Coaxial Output for Digital Audio
Software & Channel Database Upgrade via RS-232 & USB