Home
Product Catalog
New Products
North America FTA
Middle-East,Africa FTA
Europe FTA
Trade Leads
LNB and Dish
Mobile Phone
Documents
Contact Us
EnglishChinese SimplifiedChinese Traditional
Europe FTA

DM500-S in Stock ,Please Contact me As soon as possible!

 

 

DM500s is the digital Linux Set Top Box - Great EPG, Imagine full EPG functionality for all networks!!!!! No other FTA receiver can offer you that!

 

250 MHz PowerPC Processor (350 MIPS)
Linux Operating System, Open Source.
DreamCrypt embedded
1 x Smartcard-Reader
MPEG2 Hardware decoding
COM port V.24/RS232
100Mbit full duplex Ethernet Interface
2 Status - LED
32 MByte RAM
Unlimited channel list for TV/Radio
Channel change in less than 1 second
Fully automated channel scan
Supports unlimited Bouquet Lists
EPG-Support (Electronic Program Guide)
Supports multiple LNB switches (DiSEqC)
Adoptable OSD (Skin-support)
SPDI/F optical TOTX178 AC-3 output
1 x SCART output
A/V output (Audio / Video Cinch)
External 12V power supply
Dimensions: 196 x 130 x 40

 

Technical Specification:
DBS-Tuner:
Frequency Range 950 …. 2150 MHz
Signal Level - 65 dBm …. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 …. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming
Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming
LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption:
< 10W / 12V
Input voltage:
DC12V,alternating acurrent +/- 15%
Extern power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A
Others:
Ambient Temperature +15°C...+35°C
Humidity < 80%

DM600 PVR


 

          250Mhz IBM PowerPC Prozessor (350 Mips)     

  • Linux open source (most parts under the terms of GPL)
  • Integrated Compact Flash Interface Slot
  • 1 x DVB Common-Interface Slot
  • 2 x Smartcard-Reader
  • MPEG2 Hardware decoding (fully DVB compliant)
  • Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)
  • Big-size LC-Display
  • USB Port
  • 10/100 MBit compatible Ethernet Interface
  • Modem
  • 12V switch cinch
  • V.24/RS232 Interface
  • Common NIM DVB-S
  • 32 MByte Flash
  • Channel-change time < 1 second
  • 96 MByte RAM
  • Unlimited channel lists for TV/Radio
  • Integrated IDE UDMA66 Interface
  • Supports directly bouquet-lists
  • Support for internal HDD in any capacity
  • Full automatic service scan
  • Supports EPG (electronic program guide)'
  • Supports multiple LNB-Switching control (supports DiSEqC)
  • RF modulator
  • S/PDIF Interface for digital bit stream out (AC-3)
  • Supports own videotext
  • Audio/Video cinch out
  • Fully adaptable OSD in many languages and skin-support
  • 2 x Scart-interfaces
  • MINI-DIN connector for extern IR (send)
  • DBS-Tuner:
    Frequency Range 950 . 2150 MHz
    Signal Level - 65 dBm . - 25 dBm
    Signal-to-Noise Level 12 dB max.
    DBS-Tuner Input Connector F-Type female
    Input Impedance 75 Ohm
    AFC +/- 3 MHz
    Demodulation Shaped QPSK
    FEC Viterbi and Reed-Solomon
    Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
    Roll-off Factor 35 %
    Demultiplexing according ISO 13818-1

    Common-Interface:
    Common-Interface Power Consumption max. 0,3A/5V

    Output analog:
    Output Level L/R 0,5 Vss on 600 Ohm
    THD > 60 dB (1 kHz)
    Crosstalk < -65 dB

    Video decoder:
    Video Compression MPEG-2 and MPEG-1 compatible
    Video Standard PAL G/ 25 Hz
    Video Formats 4:3 / 16:9
    Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
    Letterbox precolating for 4:3 TV-Device

    Audio decoder:
    Audiokompression MPEG-1 &mp; MPEG-2 Layer I and II
    Audio Mode Dual (main/sub), Stereo
    Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

    Output digital:
    Output Level 0,5 Vss on 75 Ohm
    Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
    S/PDIF-Output optical (AC3)

    Video parameter:
    Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
    Teletext filter in conformity with ETS 300 472 Standard>

    TV-Scart:
    Output: FBAS,RGB,S-Video over OSD selectable

    VCR-Scart:
    FBAS

    Mini DIN:
    I2C for stearing of external devices
    IR funktion

    Ethernet:
    10/100 MBit compatible interface
    Function Update of Firmware, Connect to PC

    USB:
    USB 1.2 connector

    Serielle Interface RS 232:
    Typ RS232 bidirectional
    Bitrate 115,2 kBit/s max.
    Plug Connector SUB-D-9
    Function: Update of Firmware

    Pins:

    1. 5V
    2. SDA (I2C-Kanal 2)
    3. SCL
    4. 3,3V
    5. GND
    6. IR-Output
    7. GND

    LNB power and polarisation :
    LNB Current 500mA max. ; short-circuit-proof
    LNB Voltage vertical < 14V without load, > 11,5V at 400mA
    LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
    LNB shut-off at Standby-Mode

    UDMA66 IDE Interface:
    Intern for connect HDD
    Compact Flash - Reader

    Count of active satellite position:
    DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
    DiSEqC - Rotor Control

    Physical specification:
    Ambient Temperature +15°C...+35°C
    Humidity < 80%
    Size (W x D x H): 374 mm x 230 mm x 75 mm
    Weight: 1,8 kg  without HDD

    Power consumption:
    < 20W (in operation, horizontal polarization / 400mA LNB current)
    < 11W (in operation, without LNB)
    < 4W (Deep-Standby-Mode)

    Input voltage:
    230V / 50 Hz alternating acurrent +/- 15%

Fortec Star  FSCO 5600 Ultra+  For Europe market

 

One Embedded Card Slot
Dolby Digital 5.1 audio pass-through (optical)
Timer function for Sleep / Wake Up / VCR Record and Channel Reminder
Wake-up and Sleep Timers
Fully MPEG 2 / DVB compliant, MCPC/SCPC, C/KU reception
1 LNB input with IF loop through for 2nd receiver
Variable input symbol rate 2 ~ 45Msps
Manual PID scan function
DiSEqC 1.2 and USALS supported
Picture-In-Graphics function
Electronic Program Guide
Teletext supported by OSD and VBI
Multi language menu
Favorite channel group set-up and parental lock
Data transfer: receiver-to-receiver or PC-to-receiver
13V/18V LNB switching / 22KHz on/off
4 RCA connections (1 Video, 2 Audio L/R, 0/12V)

Specification:

Conditional Access Interface
Smart Card Slot
1 Embedded Card Slots
IF / Tuner
Input Frequency
950 MHz to 2150 MHz
Input Signal Level
-25 to -65dBm
Input Impedance
75 ohm nominal
Input Connector
F-type, IEC 109-24, Female
FEC Decoder
Convolution Code Rate l/2, 2/3, 3/4,
5/6 and 7/8 with Constraint Length K=7
Demodulation
QPSK
Symbol rate
2-45 Ms/s SCPC/MCPC
IF Frequency / Bandwidth
480MHz / 30MHz Type
LNB Power & Polarization
V13 / H18, 600mA MAX. over current protection
DiSEqC Control
Ver. 1.0 / 1.2 Compatible
DiSEqC
USALS compatible
Audio / Video Decoding
Video Decoder
MPEG-2 MP@ML (ISO/IEC 13818-2)
Input Rate
60Mbit/s Max
Video Resolution
720 x 576 (PAL)
Aspect Ratio
4:3, 16:9
Audio Decoder
MPEG 1- Layer I & II
Audio Mode
Mono L/R, Joint Stereo, Stereo
Audio Sampling Frequency
32, 44.1, 48 KHz
Audio / Video Output
Outputs
TV SCART, Video, Audio L/R, 0/12V
S/PDIF
Digital Audio Output, Optical
DOLBY DIGITAL 5.1 Pass-through
Serial Data Interface
Connector Type
9 Pin D-Sub (male)
Signal
RS-232C, Max. 115200Bps
Power Supply
Supply Voltage
100VAC ~ 250VAC 50~60Hz(SMPS)
Power Consumption
Max. 30W
Dimensions
260(W) x 210(D) x 45(H)mm

Openbox X 800/F 300

 

FTA+Patch, STI5518 Single chip

 

Features

1. Applied with complete software solution, Polsat auto upgrading, easy operating and editing and EPG function enables viewers enjoy the scrambled channels freely.
2. through key codes input manually.
3. MPEG2 Digital & Fully DVB-S Compliant.
4. Easy Graphic MENU Interface
5. Software Download via RS-232
6. Multi-language function
7. Last channel memory
8. 256 Color Graphic user interface
9. Dolby Digital Audio Output (optical).
10. Front panel button & IR remote control user interface
11. Editing function (TV or Radio, Group, Channel name, PID parameter, satellite name, sort)
12. EPG for on screen channel information
13. Channels memory for Multi-satellite
14. Digital Audio Output S/PDIF (optional)

HDTV Digital Terrestrial Receiver  for Europe maket

 

  • Uses ATI Xilleon HDTV chip

     DVB-T standard HDTV receiver

     Receive standard DVB-T signal which modulate by COFDM

     4:3/16:9 screen format

     Multiple display mode: 1,080i/ 720p/ 570p/576i/ 480p

     Multiple video output format: YPrPb, RGB and DVI

     Output digital video by DVI

     Output HD video by YPrPb and RGB

     Output SD video by S- Video and CVBS

     Audio output Dolby AC3 by S/PDIF

     Output stereo by RCA

     Friendly user interface

     Games

     Favorite program setting, 1,000 memory channels

     Display EPG/TTX/subtitle  

    CE certification 

    Power: 90~250V 50/60Hz

    Upgrade software through USB port



  • Powered by DIYTrade.com